Material Science

Determination of Isotopic Abundance of 13C/12C or 2H/1H and 18O/16O in Biofield Energy Treated 1-Chloro-3-Nitrobenzene (3-CNB) Using Gas Chromatography-Mass Spectrometry

Abstract

1-Chloro-3-nitrobenzene (3-CNB) is an aromatic halo-amine compound used as chemical intermediate for the production of several fine chemicals like pharmaceuticals, dyes, agricultural chemicals, etc. The stable isotope ratio analysis has drawn attention in numerous fields such as agricultural, food authenticity, biochemistry, etc. The objective of the current research was to investigate the impact of the biofield energy treatment on the isotopic abundance ratios of PM+1/PM, PM+2/PM and PM+3/PM in 3-CNB using gas chromatography – mass spectrometry (GC-MS). The sample, 3-CNB was divided into two parts – one part was denoted as control and another part was referred as biofield energy treated sample that was treated with biofield energy (The Trivedi Effect®). T1, T2, T3, and T4 were represented to different time interval analysis of the biofield treated 3-CNB. The GC-MS spectra of the both control and biofield treated 3-CNB indicated the presence of molecular ion peak [M+] at m/z 157 (calculated 156.99 for C6H4ClNO2) along with same pattern of fragmentation. The relative intensities of the parent molecule and other fragmented ions of the biofield treated 3-CNB were improved as compared to the control 3-CNB. The percentage change of the isotopic abundance ratio of PM+1/PM was significantly increased in the biofield treated 3-CNB at T1, T2 and T3 by 11.62, 18.50, and 29.82%, respectively with respect to the control 3-CNB. Accordingly, the isotopic abundance ratio of PM+2/PM in the biofield treated 3-CNB at T2 and T3 was significantly improved by 15.22 and 35.09%, respectively as compared to the control sample. The isotopic abundance ratios of PM+1/PM and PM+2/PM in the biofield treated 3-CNB at T1 and T4 were changed as compared to the control sample. The percentage change of the isotopic abundance ratio of PM+3/PM was enhanced in the biofield treated 3-CNB at T1, T2, T3, and T4 by 4.67, 18.69, 31.31 and 6.08%, respectively as compared to the control 3-CNB. The isotopic abundance ratios of PM+1/PM, PM+2/PM and PM+3/PM in the biofield treated 3-CNB changed with the time. So, the biofield energy treated 3-CNB might exhibit the altered isotope effects such as altered physicochemical and thermal properties, binding energy, and the rate of the chemical reaction as compared to the control sample. The biofield energy treated 3-CNB might assist in designing for the synthesis of pharmaceuticals, agricultural chemicals, dyes, corrosion inhibitors and other several useful industrial chemicals.

Characterization of Physical, Thermal and Spectroscopic Properties of Biofield Treated Ortho-Toluic Acid

Abstract

Toluic acid isomers are widely used as a chemical intermediate in manufacturing of dyes, pharmaceuticals, polymer stabilizers, insect repellent and other organic synthesis. The aim of present study was to evaluate the impact of biofield treatment on physical, thermal and spectroscopic properties of ortho isomer of toluic acid (OTA). The OTA sample was divided into two groups, served as control and treated. The treated group received Mr. Trivedi’s biofield treatment. Subsequently, the control and treated samples were evaluated using X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis/ derivative thermogravimetry (TGA/DTG), Fourier transform infrared (FT-IR) and ultraviolet-visible (UV-Vis) spectroscopy. XRD result showed 26.66% decrease in crystallite size in treated OTA sample as compared to control. Furthermore, DSC analysis result showed that latent heat of fusion was considerably reduced by 6.68% in treated OTA sample as compared to control. However, an increase in melting point was observed in treated sample. The melting point of treated OTA sample was found to be 107.96°C as compared to control (105.47°C) sample. Moreover, TGA/ DTG studies showed that Tmax (temperature, at which sample lost its maximum weight) was decreased by 1.21% in treated OTA sample as compared to control. It indicates that vaporisation of treated OTA sample might increase as compared to control. The FT-IR and UV-Vis spectra did not show any significant changes in spectral properties of treated OTA sample as compared to control. These findings suggest that biofield treatment has significantly altered the physical and thermal properties of OTA, which could make it more useful as chemical intermediate.

Mass Spectrometry Analysis of Isotopic Abundance of 13C, 2H, or 15N in Biofield Energy Treated Aminopyridine Derivatives

Abstract

2-Aminopyridine (2-AP) and 2,6-diaminopyridine (2,6-DAP) are two derivatives of aminopyridines that act as an important organic intermediates, mostly used in medicines, dyes and organic sensors. The aim of the study was to evaluate the impact of biofield energy treatment on isotopic abundance ratios of 2H/1H, 13C/12C, or 15N/14N, in aminopyridine derivatives using gas chromatography-mass spectrometry (GC-MS). The 2-AP and 2,6-DAP samples were divided into two parts: control and treated. The control sample remained as untreated, while the treated sample was further divided into four groups as T1, T2, T3, and T4. The treated group was subjected to Mr. Trivedi’s biofield energy treatment. The GC-MS spectra of 2-AP and 2,6-DAP showed five and six m/z peaks respectively due to the molecular ion peak and fragmented peaks of aminopyridine derivatives. The isotopic abundance ratio of 2H/1H, 13C/12C, or 15N/14N were calculated for both the derivatives and significant alteration was found in the treated samples as compared to the respective control. The isotopic abundance ratio of 2H/1H, 13C/12C, or 15N/14N in treated samples of 2-AP was decreased by 55.83% in T1 and significantly increased by 202.26% in T4. However, in case of 2,6-DAP, the isotopic abundance ratio of 2H/1H, 13C/12C, and 15N/14N, in the treated sample showed a significant increase (up to 370.54% in T3) with respect to the control. GC-MS data suggested that the biofield energy treatment on aminopyridine derivatives had significantly altered the isotopic abundance of 2H, 13C, or 15N in the treated 2-AP and 2,6-DAP as compared to the control.

The Potential Impact of Biofield Energy Treatment on the Atomic and Physical Properties of Antimony Tin Oxide Nanopowder

Abstract

Antimony tin oxide (ATO) is known for its high thermal conductivity, optical transmittance, and wide energy band gap, which makes it a promising material for the display devices, solar cells, and chemical sensor industries. The present study was undertaken to evaluate the effect of biofield energy treatment on the atomic and physical properties of ATO nanopowder. The ATO nanopowder was divided into two parts: control and treated. The treated part was subjected to Mr. Trivedi’s biofield energy treatment. The control and treated samples were analyzed using X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and electron spin resonance (ESR) spectroscopy. The XRD data revealed that the crystallite size on the plane (110) was significantly reduced to 53.1 nm as compared to the control (212.6 nm). In addition, the lattice parameter, unit cell volume, density, and molecular weight were also altered as compared to the control. The FT-IR spectra showed that the stretching vibration corresponding to Sn-OH was shifted to higher wavenumber (512 cm-1) in the treated sample as compared to the control (496 cm-1). Besides, ESR spectral analysis exhibited that the g-factor was reduced in the treated ATO sample by 21.1% as compared to the control. Also, the ESR signal width and height were reduced by 70.4% and 93.7%, respectively as compared to the control. Hence, the XRD, FT-IR, and ESR data revealed that the biofield energy treatment has a significant impact on the atomic and physical properties of ATO nanopowder. Therefore, the biofield energy treatment could be more useful in display devices and solar cell industries.

Characterization of Atomic and Physical Properties of Biofield Energy Treated Manganese Sulfide Powder

Abstract

Manganese sulfide (MnS) is known for its wide applications in solar cell, opto-electronic devices, and photochemical industries. The present study was designed to evaluate the effect of biofield energy treatment on the atomic and physical properties of MnS. The MnS powder sample was equally divided into two parts, referred as to be control and to be treated. The treated part was subjected to Mr. Trivedi’s biofield energy treatment. After that, both control and treated samples were investigated using X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and electron spin resonance (ESR) spectroscopy. The XRD data revealed that the biofield energy treatment has altered the lattice parameter, unit cell volume, density, and molecular weight of the treated MnS sample as compared to the control. The crystallite size on various planes was significantly changed from -50.0% to 33.3% in treated sample as compared to the control. The FT-IR analysis exhibited that the absorption band attributed to Mn-S stretching vibration was reduced from (634 cm-1) to 613 cm-1 in treated MnS as compared to the control. Besides, the ESR study revealed that g-factor was reduced by 3.3% in the treated sample as compared to the control. Therefore, the biofield energy treated MnS could be applied for the use in solar cell and semiconductor applications.

Effect of Biofield Energy Treatment on Physical and Structural Properties of Calcium Carbide and Praseodymium Oxide

Abstract

Calcium carbide (CaC2) is known for its wide applications in the production of acetylene and calcium cyanamide, whereas praseodymium Oxide (Pr6O11) is used in sensors and high-temperature pigments. The present study was designed to evaluate the effect of biofield energy treatment on the physical and structural properties of CaC2 and Pr6O11 powder. The powder samples of both compounds were equally divided into two parts, referred as control and treated. The treated part of both compounds was subjected to Mr. Trivedi’s biofield energy treatment. After that, both control and treated samples were investigated using X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) spectroscopy. The XRD data revealed that the biofield energy treatment has increased the lattice parameter of unit cell by 3.35% in the treated CaC2 sample as compared to the control. The density of treated CaC2 sample was reduced upto 4.49% and molecular weight was increased upto 4.70% as compared to the control. The crystallite size of CaC2 was reduced from 98.19 nm (control) to 52.93 nm in the treated CaC2 sample as compared to the control. The FT-IR analysis exhibited that the absorption band attributed to C=C stretching vibration was shifted to higher wavenumber as compared to the control. Thus, above data suggested that biofield energy treatment has considerable impact on the physical and structural properties of CaC2. Besides, in Pr6O11, the XRD did not show any significant change in lattice parameter, density and molecular weight. However, the FT-IR spectra revealed that the absorption band attributing to Pr-O stretching vibration was shifted from 593 cm-1 (control) to higher wavenumber 598 cm-1 in the treated Pr6O11 sample. Therefore, the biofield energy treatment could be applied to modify the CaC2 and Pr6O11 powder for the use in chemical industries.

Characterization of Physical, Thermal and Spectral Properties of Biofield Treated 2-Aminopyridine

Abstract

2-Aminopyridine is an important compound, which is used as intermediate for the synthesis of pharmaceutical compounds. The present work was aimed to assess the effect of Mr. Trivedi’s biofield energy treatment on the physical, thermal and spectral characteristics of 2-AP. The work was accomplished by dividing the sample in two parts i.e. one part was remained untreated, and another part had received biofield energy treatment. Subsequently, the samples were analyzed using various characterization techniques such as X-ray diffraction, differential scanning calorimetry, thermogravimetric analysis, ultra violet-visible spectroscopy, and Fourier transform infrared spectroscopy. The XRD analysis revealed a decrease in crystallite size of the treated sample (91.80 nm) as compared to the control sample (97.99 nm). Additionally, the result showed an increase in Bragg’s angle (2θ) of the treated sample as compared to the control. The DSC and Differential thermal analysis analysis showed an increase in melting temperature of the treated 2-AP with respect to the control. Moreover, the latent heat of fusion of the treated sample was increased by 3.08%. The TGA analysis showed an increase in onset of thermal degradation (Tonset), and maximum thermal decomposition temperature (Tmax) of the treated 2-AP as compared to the control sample. Additionally, the treated sample showed a reduction in weight loss as compared with the control indicating higher thermal stability of the sample. UV-visible analysis showed no changes in the absorption peak of the treated sample as compared to the control. The FT-IR spectroscopic results showed downward shifting of C-H stretching vibration 2991→2955 cm-1 in treated sample with respect to the control.

Quantitative Determination of Isotopic Abundance Ratio of 13C, 2H, and 18O in Biofield Energy Treated Ortho and Meta Toluic Acid Isomers

Abstract

O-Toluic acid (OTA) and m-toluic acid (MTA) are two isomers of toluic acid that act as an important organic intermediates, mostly used in medicines and pesticides. The aim of the study was to evaluate the impact of biofield energy treatment on isotopic abundance ratios of 2H/1H, 13C/12C, (PM+1)/PM and 18O/16O, (PM+2)/PM, in toluic acid isomers using gas chromatography-mass spectrometry (GC-MS). The OTA and MTA samples were divided into two parts: control and treated. The control sample remained as untreated, while the treated sample was further divided into four groups as T1, T2, T3, and T4. The treated group was subjected to biofield energy treatment. The GC-MS spectra of both the isomers showed five m/z peaks due to the molecular ion peak and fragmented peaks of toluic acid derivatives. The isotopic abundance ratio of (PM+1)/PM and (PM+2)/PM were calculated for both the isomers and found significant alteration in the treated isomers. The isotopic abundance ratio of (PM+1)/PM in treated samples of OTA was decreased and then slightly increased upto 2.37% in T2, where the (PM+2)/PM in treated OTA, significantly decreased by 55.3% in T3 sample. Similarly, in case of MTA, the isotopic abundance ratio of (PM+1)/PM in the treated sample showed a slight increase the (PM+2)/PM was decreased by 11.95% in T2 as compared to their respective control. GC-MS data suggests that the biofield energy treatment on toluic acid isomers had significantly altered the isotopic abundance of 2H, 13C, and 18O in OTA and MTA as compared to the control.

Physicochemical Characterization of Biofield Energy Treated Hi VegTM Acid Hydrolysate

Abstract

The hydrolysed vegetable proteins are acidic or enzymatic hydrolytic product of proteins derived from various sources such as milk, meat or vegetables. The current study was designed to evaluate the impact of biofield energy treatment on the various physicochemical and spectra properties of Hi VegTM acid hydrolysate i.e. a hydrolysed vegetable protein. The Hi VegTM acid hydrolysate sample was divided into two parts that served as control and treated sample. The treated sample was subjected to the biofield energy treatment and its properties were analysed using particle size analyser, X-ray diffraction (XRD), surface area analyser, UV-visible and infrared (FT-IR) spectroscopy, and thermogravimetric analysis. The results of various parameters were compared with the control (untreated) part. The XRD data showed the decrease in crystallite size of treated sample from 110.27 nm (control) to 79.26 nm. The particle size was also reduced in treated sample as 162.13 μm as compared to the control sample (168.27 μm). Moreover, the surface area analysis revealed the 63.79% increase in the surface area of the biofield treated sample as compared to the control. The UV-Vis spectra of both samples i.e. control and treated showed the absorbance at same wavelength. However, the FT-IR spectroscopy revealed the shifting in peaks corresponding to N-H, C-H, C=O, C-N, and C-S functional groups in the treated sample with respect to the control. The thermal analysis also revealed the alteration in degradation pattern along with increase in onset temperature of degradation and maximum degradation temperature in the treated sample as compared to the control. The overall data showed the impact of biofield energy treatment on the physicochemical and spectroscopic properties of the treated sample of Hi VegTM acid hydrolysate. The biofield treated sample might show the improved solubility, wettability and thermal stability profile as compared to the control sample.

Physicochemical and Spectral Characterization of Biofield Energy Treated 4-Methylbenzoic Acid

Abstract

The present study was aimed to analyse the impact of biofield energy treatment on the physicochemical and spectral properties of 4-MBA. The compound was divided into two parts which are referred as the control and treated sample. The treated sample was subjected to Mr. Trivedi’s biofield energy treatment and analysed with respect to the control sample. The various analytical techniques used were X-ray diffraction (XRD), surface area analysis, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR), and UV-visible spectroscopy. The XRD data revealed the alteration in the relative intensities of the peaks as well as reduction in the average crystallite size (24.62%) of the treated sample as compared to the control. The surface area analysis revealed a slight reduction in the surface area of the treated sample. The differential scanning calorimetry analysis reported a slight increase in the melting point while significant reduction in the latent heat of fusion of the treated sample (39.96 J/g) as compared to the control (133.72 J/g). Moreover, the TGA thermogram of the treated sample revealed the reduction in the onset temperature and maximum thermal degradation temperature as compared to the control. However, the FT-IR and UV-Vis spectra of treated sample did not show any significant alteration as compared to their respective control spectra. The overall data indicated the improved physical and thermal properties of the biofield treated 4-MBA sample that might be helpful in increasing the reaction kinetics, where it will be used as a reaction intermediate.

Determination of Isotopic Abundance of 2H, 13C, 18O, and 37Cl in Biofield Energy Treated Dichlorophenol Isomers

Abstract

2,4-Dichlorophenol (2,4-DCP) and 2,6-dichlorophenol (2,6-DCP) are two isomers of dichlorophenols, have been used as preservative agents for wood, paints, vegetable fibers and as intermediates in the production of pharmaceuticals and dyes. The aim of the study was to evaluate the impact of biofield energy treatment on the isotopic abundance ratios of 2H/1H or 13C/12C, and 18O/16O or 37Cl/35Cl, in dichlorophenol isomers using gas chromatography-mass spectrometry (GC-MS). The 2,4-DCP and 2,6-DCP samples were divided into two parts: control and treated. The control sample remained as untreated, while the treated sample was further divided into four groups as T1, T2, T3, and T4. The treated group was subjected to Mr. Trivedi’s biofield energy treatment. The GC-MS spectra of 2,4-DCP and 2,6-DCP showed three to six m/zpeaks at 162, 126, 98, 73, 63, 37 etc. due to the molecular ion peak and fragmented peaks. The isotopic abundance ratios (percentage) in both the isomers were increased significantly after biofield treatment as compared to the control. The isotopic abundance ratio of (PM+1)/PM and (PM+2)/PM after biofield energy treatment were increased by 54.38% and 40.57% in 2,4-DCP and 126.11% and 18.65% in 2,6-DCP, respectively which may affect the bond energy, reactivity and finally stability to the product.

Characterization of Physicochemical and Thermal Properties of Biofield Treated Ethyl Cellulose and Methyl Cellulose

Abstract

2,4-Dichlorophenol (2,4-DCP) and 2,6-dichlorophenol (2,6-DCP) are two isomers of dichlorophenols, have been used as preservative agents for wood, paints, vegetable fibers and as intermediates in the production of pharmaceuticals and dyes. The aim of the study was to evaluate the impact of biofield energy treatment on the isotopic abundance ratios of 2H/1H or 13C/12C, and 18O/16O or 37Cl/35Cl, in dichlorophenol isomers using gas chromatography-mass spectrometry (GC-MS). The 2,4-DCP and 2,6-DCP samples were divided into two parts: control and treated. The control sample remained as untreated, while the treated sample was further divided into four groups as T1, T2, T3, and T4. The treated group was subjected to Mr. Trivedi’s biofield energy treatment. The GC-MS spectra of 2,4-DCP and 2,6-DCP showed three to six m/zpeaks at 162, 126, 98, 73, 63, 37 etc. due to the molecular ion peak and fragmented peaks. The isotopic abundance ratios (percentage) in both the isomers were increased significantly after biofield treatment as compared to the control. The isotopic abundance ratio of (PM+1)/PM and (PM+2)/PM after biofield energy treatment were increased by 54.38% and 40.57% in 2,4-DCP and 126.11% and 18.65% in 2,6-DCP, respectively which may affect the bond energy, reactivity and finally stability to the product.

Characterization of Physical, Spectroscopic and Thermal Properties of Biofield Treated Biphenyl

Abstract

Biphenyl is used as an intermediate for synthesis of various pharmaceutical compounds. The objective of present research was to investigate the influence of biofield treatment on physical, spectroscopic and thermal properties of biphenyl. The study was performed in two groups (control and treated). The control group remained as untreated, and biofield treatment was given to treated group. The control and treated biphenyl were characterized by X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, Ultravioletvisible (UV-Vis) spectroscopy and surface area analysis. The treated biphenyl showed decrease in intensity of XRD peaks as compared to control. Additionally, crystallite size was decreased in treated biphenyl by 16.82% with respect to control. The treated biphenyl (72.66ºC) showed increase in melting temperature as compared to control biphenyl (70.52ºC). However, the latent heat of fusion (ΔH) of treated biphenyl was substantially changed by 18.75% as compared to control. Additionally, the treated biphenyl (155.14ºC) showed alteration in maximum thermal decomposition temperature (Tmax) as compared to control sample (160.97ºC). This showed the alteration in thermal stability of treated biphenyl as compared to control. Spectroscopic analysis (FT-IR and UV-visible) showed no alteration in chemical nature of treated biphenyl with respect to control. Surface area analysis through Brunauer-Emmett-Teller analysis (BET) analyzer showed significant alteration in surface area as compared to control. Overall, the result demonstrated that biofield has substantially affected the physical and thermal nature of biphenyl.

Characterization of Physical, Thermal and Spectral Properties of Biofield Treated 2,6-Dichlorophenol

Abstract

2,6-Dichlorophenol (2,6-DCP) is a compound used for the synthesis of chemicals and pharmaceutical agents. The present work is intended to evaluate the impact of Mr. Trivedi’s biofield energy treatment on physical, thermal and spectral properties of the 2,6-DCP. The control and treated 2,6-DCP were characterized by various analytical techniques such as X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, and ultra violet-visible spectroscopy (UV-vis) analysis. The XRD results showed the increase in crystallite size of treated sample by 28.94% as compared to the control sample. However, the intensity of the XRD peaks of treated 2,6-DCP were diminished as compared to the control sample. The DTA analysis showed a slight increase in melting temperature of the treated sample. Although, the latent heat of fusion of the treated 2,6-DCP was changed substantially by 28% with respect to the control sample. The maximum thermal decomposition temperature (Tmax) of the treated 2,6-DCP was decreased slightly in comparison with the control. The FT-IR analysis showed a shift in C=C stretching peak from 1464→1473 cm-1 in the treated sample as compared to the control sample. However, the UV-vis analysis showed no changes in absorption peaks of treated 2,6-DCP with respect to the control sample. Overall, the result showed a significant effect of biofield energy treatment on the physical, thermal and spectral properties of 2,6-DCP. It is assumed that increase in crystallite size and melting temperature of the biofield energy treated 2,6-DCP could alleviate its reaction rate that might be a good prospect for the synthesis of pharmaceutical compounds.

Analysis of Physical, Thermal, and Structural Properties of Biofield Energy Treated Molybdenum Dioxide

Abstract

Molybdenum dioxide (MoO2) is known for its catalytic activity toward reforming hydrocarbons. The objective of this study was to evaluate the effect of biofield energy treatment on physical, thermal, and structural properties in MoO2. The MoO2 powder sample was divided into two parts, one part was remained as untreated, called as control, while the other part was subjected to Mr. Trivedi’s biofield energy treatment and called as treated. Both control and treated samples were investigated using X-ray diffraction (XRD), thermogravimetric analysis (TGA), and Fourier transform infrared (FT-IR) spectroscopy. The XRD data exhibited that the biofield treatment has altered the lattice parameters, unit cell volume, density and molecular weight of the treated sample as compared to the control. The TGA study revealed that the onset temperature of thermal degradation of MoO2 was reduced from 702.87°C to 691.92°C. Besides, the FT-IR spectra exhibited that the absorption band corresponding to Mo=O stretching vibration was shifted to lower wavenumber i.e. 975 cm-1 (control) to 970 cm-1 in treated sample. Hence, above results suggested that biofield energy treatment has altered the physical, thermal, and structural properties in MoO2 powder. Therefore, the biofield treatment could be applied to modify the catalytic properties of MoO2 in pharmaceutical industries.

Evaluation of Physical and Structural Properties of Biofield Energy Treated Barium Calcium Tungsten Oxide

Abstract

Barium calcium tungsten oxide (Ba2CaWO6) is known for its double perovskite-type crystal structure. The present study was designed to see the effect of biofield energy treatment on physical, atomic, and structural properties of Ba2CaWO6. In this study, Ba2CaWO6 powder sample was divided into two parts, one part was remained as untreated, denoted as control, while the other part was subjected to Mr. Trivedi’s biofield energy treatment and coded as treated. After that, the control and treated samples were analyzed using X-ray diffraction (XRD), surface area analyzer, Fourier transform infrared (FT-IR), and electron spin resonance (ESR) spectroscopy. The XRD data revealed that the crystallite size was decreased by 20% in the treated Ba2CaWO6 sample as compared to the control. The surface area of treated Ba2CaWO6 was increased by 9.68% as compared to the control sample. The FT-IR spectroscopic analysis exhibited that the absorbance band corresponding to stretching vibration of W-O bond was shifted to higher wavenumber from 665 cm-1 (control) to 673 cm-1 after biofield energy treatment. The ESR spectra showed that the signal width and height were decreased by 88.9 and 90.7% in treated Ba2CaWO6 sample as compared to the control. Therefore, above result revealed that biofield energy treatment has a significant impact on the physical and structural properties of Ba2CaWO6.

Evaluation of Biofield Energy Treatment on Physical and Thermal Characteristics of Selenium Powder

Abstract

Selenium (Se) is an essential trace element, and its deficiency in the humans leads to increase the risk of various diseases, such as cancer and heart diseases. The objective of this study was to investigate the influence of biofield energy treatment on the physical and thermal properties of the selenium powder. The selenium powder was divided into two parts denoted as control and treated. The Control part was remained as untreated and treated part received Mr. Trivedi’s biofield energy treatment. Both control and treated selenium samples were characterized using x-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis – differential thermal analysis (TGA-DTA), and Fourier transform infrared spectroscopy (FT-IR). The XRD data showed that biofield energy treatment has slightly altered the lattice parameter (0.07%), unit cell volume (0.15%), density (-0.14%), atomic weight (0.15%), and nuclear charge per unit volume (-0.21%) in the treated selenium powder as compared to the control. The crystallite size of the treated selenium powder was reduced considerably from 106.98 nm (control) to 47.55 nm. The thermal analysis study showed that the latent heat of fusion was 64.61 J/g in the control, which changed to 68.98, 52.70, 49.71 and 72.47 J/g in the treated T1, T2, T3, and T4 samples respectively. However, the melting temperature did not show any considerable change in the treated selenium samples as compared to the control. The FT-IR spectra showed the absorption peak at 526 and 461 cm-1, which corresponding to metal oxide bonding vibration in the control and treated selenium powder respectively. Hence, overall data suggest that, the biofield energy treatment considerably altered the physical and thermal properties of selenium powder. Therefore, biofield energy treatment could make selenium even more useful nutrient in human body.

Evaluation of Atomic, Physical, and Thermal Properties of Bismuth Oxide Powder: An Impact of Biofield Energy Treatment

Abstract

Bismuth oxide (Bi2O3) is known for its application in several industries such as solid oxide fuel cells, optoelectronics, gas sensors and optical coatings. The present study was designed to evaluate the effect of biofield energy treatment on the atomic, physical, and thermal properties of Bi2O3. The Bi2O3 powder was equally divided into two parts: control and treated. The treated part was subjected to biofield energy treatment. After that, both control and treated samples were investigated using X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, and electron spin resonance (ESR) spectroscopy. The XRD data exhibited that the biofield treatment has altered the lattice parameter (-0.19%), unit cell volume (-0.58%), density (0.59%), and molecular weight (-0.57%) of the treated sample as compared to the control. The crystallite size was significantly increased by 25% in treated sample as compared to the control. Furthermore, TGA analysis showed that control and treated samples were thermally stable upto tested temperature of 831°C. Besides, the FT-IR analysis did not show any significant change in absorption wavenumber in the treated sample as compared to the control. The ESR study revealed that g-factor was increased by 13.86% in the treated sample as compared to the control. Thus, above data suggested that biofield energy treatment has altered the atomic and physical properties of Bi2O3. Therefore, the biofield treated Bi2O3 could be more useful in solid oxide fuel cell industries.

Chromatographic, Spectroscopic, and Thermal Characterization of Biofield Energy Treated N,N-Dimethylformamide

Abstract

N,N-Dimethylformamide (DMF) is a ‘universal’ solvent and has wide variety of applications in organic synthesis, purification, crystallization, and as cross-linking agent. The aim of this study was to evaluate the physicochemical and spectroscopic properties of DMF after the biofield energy treatment using various analytical techniques. DMF sample was divided into two parts, one part (control) remained as untreated, while the other (treated) part was treated with Mr. Trivedi’s biofield energy treatment. The treated sample was subdivided into three parts named as T1, T2, and T3 for gas chromatography-mass spectrometry (GC-MS) analysis. Five relatively intense peaks were observed in the mass spectrum of both control and treated samples of DMF. The GC-MS data revealed that the isotopic abundance ratio of (PM+1)/PM in DMF was slightly decreased by 5.76% in T1, and increased by 48.73%, and 30.17% in T2, and T3 samples, respectively as compared to the control [where, PM- primary molecule, (PM+1)- isotopic molecule either for 13C or 2H or 15N]. Similarly, the isotopic abundance ratio of (PM+2)/PM was decreased by 10.34% in T1 and then increased upto 43.67% (T2) as compared to the control [where, (PM+2)- isotopic molecule for 18O]. In high performance liquid chromatography (HPLC), the treated DMF showed similar retention time (TR) as compared to the control with an additional small peak at 2.26 min appeared in the treated sample. In DSC thermogram the heat change in a sharp endothermic transition at around 61°C of treated DMF was increased by 152.56% as compared to the control. Further, C=O and C-N stretching frequencies of treated sample were shifted by 7 cm-1 and 3 cm-1, respectively towards low energyregion in Fourier transform infrared (FT-IR) spectroscopy. These results suggested that biofield energy treatment has significantly altered the physical and spectroscopic properties of DMF, which could make them more stable solvent in organic synthesis and as a suitable formulation agent in polymer/paint industry.

Thermal, Spectroscopic and Chromatographic Characterization of Biofield Energy Treated Benzophenone

Abstract

The aim of the present study was to evaluate the impact of biofield energy treatment on the thermal, spectroscopic, and chemical properties of benzophenone. The study was done using various analytical methods such as gas chromatography-mass spectrometry (GC-MS), high performance liquid chromatography (HPLC), differential scanning calorimetry (DSC), Fourier transform infrared (FT-IR) spectroscopy, and ultraviolet-visible (UV-Vis) spectroscopy. The benzophenone sample was divided into two parts, one part was subjected to Mr. Trivedi’s biofield energy treatment, called as treated and the other part was remained as untreated, called as control. Mass spectra showed the molecular ion peak at m/z = 182 in control and all the treated benzophenone samples with different intensities (treated samples further divided in to three parts, T1, T2, and T3 for GC-MS study). The isotopic abundance ratio of 2H/1H, 13C/12C (PM+1)/PM and in treated sample was decreased by 44.87% in T2 and slightly increased upto 5.79% in case of T1 as compared to the control [where, PM- primary molecule, (PM+1)- isotopic molecule either for 13C or 2H]. Moreover, isotopic abundance ratio of 18O/16O (PM+2)/PM in the treated sample was increased up to 22.64% in T3. The retention time of treated benzophenone was slightly increased (0.88 min) as compared to the control in HPLC chromatogram. The DSC data exhibited that the heat of degradation of treated benzophenone was increased by 674.16% as compared to the control. While, C=O stretching frequency of treated sample was shifted by 6 cm-1 to low energy region in FT-IR spectroscopy. Further, the UV-Vis spectra of control sample showed characteristic absorption peaks at 210 nm and 257 nm that was blue shifted to 205 nm and 252 nm, respectively in the treated sample. These results suggested that biofield treatment has significantly altered the thermal, spectroscopic, and chemical properties of benzophenone, which could make them more useful as reaction intermediate in industrial applications.

Experimental Investigation on Physical, Thermal and Spectroscopic Properties of 2-Chlorobenzonitrile: Impact of Biofield Treatment

Abstract

2-chlorobenzonitrile (2-ClBN) is widely used in the manufacturing of azo dyes, pharmaceuticals, and as intermediate in various chemical reactions. The aim of present study was to evaluate the impact of biofield treatment on physical, thermal and spectroscopic properties of 2-ClBN. 2-ClBN sample was divided into two groups that served as treated and control. The treated group received Mr. Trivedi’s biofield treatment. Subsequently, the control and treated samples were evaluated using X-ray diffraction (XRD), surface area analyser, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) and ultraviolet-visible (UV-Vis) spectroscopy. XRD result showed a decrease in crystallite size in treated samples i.e. 4.88% in 2-ClBN along with the increase in peak intensity as compared to control. However, surface area analysis showed a decrease in surface area of 64.53% in treated 2-ClBN sample as compared to the control. Furthermore, DSC analysis results showed a significant increase in the latent heat of fusion (28.74%) and a slight increase in melting temperature (2.05%) in treated sample as compared to the control. Moreover, TGA/DTG studies showed that the control and treated 2-ClBN samples lost 61.05% and 46.15% of their weight, respectively. The FT-IR spectra did not show any significant change in treated 2-ClBN sample as compared to control. However, UV-Vis spectra showed an increase in the intensity of peak as compared to control sample. These findings suggest that biofield treatment has significantly altered the physical, thermal and spectroscopic properties of 2-ClBN, which could make them more useful as a chemical intermediate.

Physicochemical and Spectroscopic Characteristics of Biofield Treated p-Chlorobenzophenone

Abstract

p-Chlorobenzophenone (p-CBP) is the important chemical intermediate used for the synthesis of several pharmaceutical drugs like fenofibrate, cetirizine, alprazolam, and benzodiazepine. The aim of this study was set to evaluate the impact of biofield energy treatment on physicochemical and spectroscopic properties of p-CBP. The study was accomplished in two groups i.e. control and treated. The treated group was subjected to Mr. Trivedi’s biofield energy treatment. Subsequently, the control and treated samples of p-CBP were analyzed using X-ray diffraction (XRD), particle size analyzer, surface area analyzer, differential scanning calorimetry (DSC), thermogravimetric analysis-derivative thermogravimetric analysis (TGA-DTG), Fourier transform infrared (FT-IR), and ultraviolet-visible (UV-Vis) spectroscopy. The XRD study exhibited the increase in average crystallite size (25.93%) as well as the intensity of XRD peaks of treated p-CBP, as compared to the control. The particle size analysis showed the reduction in particle size of fine particles (≤51.49 μm) by 21.6% (d10), whereas, increase in particle size of large particles (≥433.59 μm) by 12.82% (d90) and 17.71% (d99), respectively after biofield treatment, as compared to the control. The surface area analysis exhibited the surface area as 0.7005 m2/g in control and 0.7020 m2/g in treated sample of p-CBP. The DSC thermogram of treated p-CBP exhibited the slight decrease in melting temperature. However, the latent heat of fusion was significantly altered (24.90%) after biofield energy treatment as compared to the control. TGA analysis showed the weight loss by 57.36% in control and 58.51% in treated sample. In addition, the onset temperature of thermal degradation was also decreased by 6.32% after biofield energy treatment as compared to the control p- CBP. The FT-IR and UV spectroscopic study did not show the alteration in the wavenumber and wavelength, respectively in treated p-CBP as compared to the control. Altogether, the XRD, particle size and thermal analysis suggest that biofield energy treatment has significant impact on physical and thermal properties of treated p-CBP.

Spectral and Thermal Properties of Biofield Energy Treated Cotton

Abstract

Cotton has widespread applications in textile industries due its interesting physicochemical properties. The objective of this study was to investigate the influence of biofield energy treatment on the spectral, and thermal properties of the cotton. The study was executed in two groups namely control and treated. The control group persisted as untreated, and the treated group received Mr. Trivedi’s biofield energy treatment. The control and treated cotton were characterized by different analytical techniques such as differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), fourier transform infrared (FT-IR) spectroscopy, and CHNSO analysis. DSC analysis showed a substantial increase in exothermic temperature peak of the treated cotton (450 ºC) as compared to the control sample (382ºC). Additionally, the enthalpy of fusion (ΔH) was significantly increased by 86.47% in treated cotton. The differential thermal analysis (DTA) analysis showed an increase in thermal decomposition temperature of treated cotton (361ºC) as compared to the control sample (358ºC). The result indicated the increase in thermal stability of the treated cotton in comparison with the control. FT-IR analysis showed an alterations in –OH stretching (3408→3430 cm-1), carbonyl stretching peak (1713-1662 cm-1), C-H bending (1460-1431 cm-1), -OH bending (580-529 cm-1) and –OH out of plane bending (580-529 cm-1) of treated cotton with respect to the control sample. CHNSO elemental analysis showed a substantial increase in the nitrogen percentage by 19.16% and 2.27% increase in oxygen in treated cotton as compared to the control. Overall, the result showed significant changes in spectral and thermal properties of biofield energy treated cotton. It is assumed that biofield energy treated cotton might be interesting for textile applications.

Studies on Physicochemical Properties of Biofield Treated 2,4-Dichlorophenol

Abstract

The chlorinated phenols are widely used in chemical industries for the manufacturing of herbicides, insecticides, etc. However, due to consistent use they create hazards to the environment. This study was designed to use an alternative method i.e. biofield energy treatment and analyse its impact on the physicochemical properties of 2,4-dichlorophenol (2,4- DCP), which are the important factors related to its degradation. The 2,4-DCP sample was treated with Mr. Trivedi’s biofield energy and analyzed as compared to the untreated 2,4-DCP sample (control) using various analytical techniques. The X-ray diffraction studies revealed up to 19.4% alteration in the lattice parameters along with approximately 1.8% alteration in the molecular weight, unit cell volume and density of the treated sample. The crystallite size of treated sample was increased and found as 215.24 nm as compared to 84.08 nm in the control sample. Besides, the thermal study results showed an alteration in the thermal stability profile of the treated sample as compared to the control. The differential scanning calorimetry studies revealed the decrease in the thermal decomposition temperature from 137.9°C (control) to 131.94°C in the treated sample along with 92.19% alteration in the quantity of heat absorbed during the process. Moreover, the thermogravimetric analysis showed that onset temperature of degradation was decreased, while the percent weight loss of the sample was increased from 59.12% to 71.74% in the treated sample as compared to the control. However, the Fourier transform infrared and UV-visible spectroscopic studies did not show any significant alteration in the spectra of the treated sample as compared to the control. Hence, the overall studies revealed the impact of biofield energy treatment on the physical and thermal properties of the 2,4- DCP sample.

Evaluation of Isotopic Abundance Ratio in Naphthalene Derivatives After Biofield Energy Treatment Using Gas Chromatography-Mass Spectrometry

Abstract

Naphthalene and 2-naphthol are two naphthalene derivatives, which play important roles in the chemical and pharmaceutical industries. The aim of this study was to evaluate the impact of biofield energy treatment on the isotopic abundance of 13C/12C or 2H/1H and 18O/16O in naphthalene and 2-naphthol using gas chromatography-mass spectrometry (GC-MS). Naphthalene and 2-naphthol samples were divided into two parts: control and treated. The control group remained as untreated, while the treated group was subjected to Mr. Trivedi’s biofield energy treatment. The treated samples were subdivided into four parts named as T1, T2, T3 and T4. Control and treated samples were characterized using GC-MS. The GC-MS data revealed that the isotopic abundance ratio of 13C/12C or 2H/1H, (PM+1)/PM and 18O/16O, (PM+2)/PM were increased significantly in treated naphthalene and 2-naphthol (where PM-primary molecule, (PM+1) isotopic molecule either for 13C or 2H and (PM+2) is the isotopic molecule for 18O). The isotopic abundance ratio of (PM+1)/PM in the treated T2 samples of naphthalene and 2-naphthol was increased up to 129.40% and 165.40%, respectively as compared to their respective control. However, the isotopic abundance ratio of (PM+1)/PM in the treated T1, T3 and T4 samples of naphthalene was decreased by 44.41%, 33.49% and 30.3%, respectively as compared to their respective control. While in case of 2-naphthol, the isotopic abundance ratio of (PM+1)/PM was decreased by 39.57% in T1 sample and then gradually increased up to 9.85% from T3 to T4 samples. The isotopic abundance ratio of (PM+2)/PM in treated T2 sample of 2-naphthol was increased up to 163.24%, whereas this value was decreased by 39.57% in treated T1 sample. The GC-MS data suggest that the biofield energy treatment has significantly altered the isotopic abundance of 2H, 13C in naphthalene and 2H, 13C and 18O in 2-naphthol as compared to the control.

Characterization of Physical, Thermal and Spectroscopic Properties of Biofield Energy Treated P-Phenylenediamine and p-Toluidine

Abstract

Aromatic amines and their derivatives are widely used in the production of dyes, cosmetics, medicines and polymers. However, they pose a threat to the environment due to their hazardous wastes as well as their carcinogenic properties. The objective of the study was to use an alternate strategy i.e. biofield energy treatment and analyse its impact on physicochemical properties of aromatic amine derivatives viz. p-phenylenediamine (PPD) and p-toluidine. For this study, both the samples were taken and divided into two parts. One part was considered as control and another part was subjected to Mr. Trivedi’s biofield treatment. After treatment, both samples were analysed for their physical, thermal and spectral properties as compared to their respective control samples. The analysis was done by using X-ray diffraction (XRD), surface area analyser, thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR), and ultraviolet-visible (UV-Vis) spectroscopy. The XRD studies and surface area analysis of PPD sample revealed that the crystallite size and surface area of the treated sample was increased by 11.12% and 8.49%, respectively as compared to the control sample. In case of p-toluidine, the crystallite size and surface area of treated sample were decreased by 4.8% and 8.43%, respectively as compared to control. The treated PPD sample also showed an alteration in thermal degradation properties as it exhibited two-steps thermal decomposition as compared to single step decomposition in the control sample. In case of p-toluidine, the treated sample showed decreased onset temperature of degradation (112°C→100°C) and Tmax (temperature at which maximum weight loss occur) (136°C→125°C) as compared to control sample. Moreover, the FT-IR analysis revealed that C-C aromatic stretching peak in treated PPD sample was shifted to the lower frequency (1456→1444 cm-1) as compared to the control sample. Besides, in p-toluidine, the treated sample showed the alteration in frequencies of C-N-H bending, C-H bending, C-H stretching, and C-C aromatic stretching and bending peaks as compared to the control sample. However, no alteration was found in UV-Vis spectroscopic analysis of treated PPD and p-toluidine samples as compared to their respective control samples. These findings suggest that the biofield treatment significantly altered the physical, thermal and IR spectroscopic properties of PPD and p-toluidine samples.

Physicochemical and Spectroscopic Characterization of p-Chlorobenzaldehyde: An Impact of Biofield Energy Treatment

Abstract

p-Chlorobenzaldehyde (p-CBA) is used as an important chemical intermediate for the preparation of pharmaceuticals, agricultural chemicals, dyestuffs, optical brighteners, and metal finishing products. The study aimed to evaluate the effect of biofield energy treatment on the physicochemical and spectroscopic properties of p-CBA. The study was accomplished in two groups i.e. control and treated. The control group was remained as untreated, while the treated group was subjected to Mr. Trivedi’s biofield energy treatment. Finally, both the samples (control and treated) were evaluated using various analytical techniques. The surface area analysis showed a substantial increase in the surface area by 23.06% after biofield treatment with respect to the control sample. The XRD analysis showed the crystalline nature of both control and treated samples. The X-ray diffractogram showed the significant alteration in the peak intensity in treated sample as compared to the control. The XRD analysis showed the slight increase (2.31%) in the crystallite size of treated sample as compared to the control. The TGA analysis exhibited the decrease (10%) in onset temperature of thermal degradation form 140°C (control) to 126°C in treated sample. The Tmax (maximum thermal degradation temperature) was slightly decreased (2.14%) from 157.09°C (control) to 153.73°C in treated sample of p-CBA. This decrease in Tmax was possibly due to early phase of vaporization in treated sample as compared to the control. The FT-IR spectrum of treated p-CBA showed the increase in wavenumber of C=C stretching as compared to the control. The UV spectroscopic study showed the similar pattern of wavelength in control and treated samples.

Altogether, the surface area, XRD, TGA-DTG and FT-IR analysis suggest that Mr. Trivedi’s biofield energy treatment has the impact to alter the physicochemical properties of p-CBA. This treated p-CBA could be utilized as a better chemical intermediate than the control p-CBA for the synthesis of pharmaceutical drugs and organic chemicals.

Evaluation of Thermal and Physical Properties of Magnesium Nitride Powder: Impact of Biofield Energy Treatment

Abstract

Magnesium nitride (Mg3N2) has gained extensive attention due to its catalytic and optoelectronic properties. The present investigation was aimed to evaluate the effect of biofield energy treatment on physical and thermal properties of Mg3N2 powder. The Mg3N2 powder was divided into two parts i.e. control and treated. The control part was remained as untreated and the treated part was subjected to the Mr. Trivedi’s biofield energy treatment. Subsequently, the control and treated Mg3N2 samples were characterized using differential scanning calorimetry (DSC), analysis thermogravimetric(TGA), and X-ray diffraction (XRD). The DSC results showed the specific heat capacity of 2.24 Jg-1 °C-1 in control, which increased upto 5.55 Jg-1 °C-1 in treated Mg3N2 sample. The TGA data revealed that the onset temperature for the formation of magnesium oxide, possibly due to oxidation of Mg3N2 in the presence of air and moisture, was reduced from 421.0°C (control) to 391.33°C in treated sample. Besides, the XRD data revealed that the lattice parameter and unit cell volume of treated Mg3N2 samples were increased by 0.20 and 0.61% respectively, as compared to the control. The shifting of all peaks toward lower Bragg angle was observed in treated sample as compared to the control. The XRD diffractogram also showed that the relative intensities of all peaks were altered in treated sample as compared to control. In addition, the density of treated Mg3N2 was reduced by 0.60% as compared to control. Furthermore, the crystallite size was significantly increased from 108.05 nm (control) to 144.04 nm in treated sample as compared to the control. Altogether data suggest that biofield energy treatment has substantially altered the physical and thermal properties of Mg3N2 powder. Thus, the biofield treatment could be applied to modulate the catalytic and optoelectronic properties of Mg3N2 for chemical and semiconductor industries.

Physical and Structural Characterization of Biofield Energy Treated Carbazole

Abstract

Carbazole is a class of phytochemical associated with cancer prevention. It attracted a significant interest in recent time for their usefulness in synthetic heterocyclic chemistry, analytical chemistry and pharmacology. The aim of the study was to evaluate the impact of biofield energy treatment on carbazole by various analytical methods. The study was performed in two groups i.e. control and treatment. The treatment group was subjected to Mr. Trivedi’s biofield treatment. Subsequently, both the samples were characterized with respect to physical and structural properties using X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR), gas chromatography-mass spectrometry (GC-MS), laser particle size analyzer, and surface area analyzer. The XRD study revealed that the crystallite size of treated carbazole was decreased significantly with 37.5% as compared to the control. In addition, the intensity of XRD peaks was slightly decreased as compared to the control. The latent heat of fusion (ΔH) of treated carbazole was substantially increased by 253.6% as compared to the control. Maximum degradation temperature (Tmax) of treated carbazole was increased by 41.46°C as compared to the control (211.93°C to 253.39°C). FT-IR spectra showed similar stretching frequencies in both control and treated carbazole samples. GC-MS data revealed that isotopic abundance ratio of either 13C/12C or 15N/14N or 2H/1H (PM+1/PM) of treated carbazole was significantly increased up to 278.59%. Particle size analysis showed substantial decrease in average particle size (d50) and d90 of the treated carbazole by 25.24% and 4.31%, respectively as compared to the control. The surface area analysis exhibited an increase in the surface area of treated sample by 4.8% as compared to the control. Overall, the experimental results suggest that biofield energy treatment has significant effect on physical, spectral and thermal properties of carbazole.

Thermal, Spectroscopic and Chemical Characterization of Biofield Energy Treated Anisole

Abstract

The objective of the present study was to evaluate the impact of biofield energy treatment on the thermal, spectroscopic, and chemical properties of anisole by various analytical methods such as gas chromatography-mass spectrometry (GC-MS), high performance liquid chromatography (HPLC), differential scanning calorimetry (DSC), Fourier transform infrared (FT-IR) spectroscopy, and ultraviolet-visible (UV-Vis) spectroscopy. The anisole sample was divided into two parts, control and treated. The control part was remained same while the other part was treated with Mr. Trivedi’s unique biofield energy treatment. Mass spectra showed the molecular ion peak with five fragmented peaks in control and all treated samples. The isotopic abundance ratio of 2H/1H, and 13C/12C [(PM+1)/PM] in treated sample was increased by 154.47% (T1) as compared to the control [where, PM- primary molecule, (PM+1)-isotopic molecule either for 13C or 2H]. The HPLC chromatogram showed retention time of treated anisole was slightly decreased as compared to the control. Moreover, the heat change in the sharp endothermic transition of treated anisole was increased by 389.07% in DSC thermogram as compared to the control. Further, C-C aromatic stretching frequency of treated sample was shifted by 2 cm-1 to low energy region in FT-IR spectroscopy. The UV-Vis spectra of control sample showed characteristic absorption peaks at 325 nm, which was red shifted and appeared as shoulder in the treated sample. These results suggested that biofield treatment has significantly altered the physical and spectroscopic properties of anisole, which could make them stable solvent for organic synthesis and as a suitable reaction intermediate in industrial applications.

Evaluation of Physical, Thermal and Spectral Parameters of Biofield Energy Treated Methylsulfonylmethane

Abstract

Abstract
The methylsulfonylmethane (MSM) is an organosulfur compound having sulfonyl functional group. It is occurred naturally in some primitive plants and used in disease related to chronic pain, inflammation, and arthritis. This study was attempted to evaluate the impact of biofield energy treatment on the physical, thermal, and spectral properties of MSM. The study was performed in two groups viz. the control group was remained as untreated, while the treated group was subjected to Mr. Trivedi’s biofield energy treatment. After that, both the control and treated samples were analyzed using surface area analyzer, X-ray diffraction (XRD), thermogravimetric analysisderivative thermogravimetry (TGA-DTG), differential scanning calorimetry (DSC), and Fourier transform infrared (FTIR) spectroscopy. The surface area analysis exhibited a significant decrease in the surface area of treated sample by 22.96% as compared to the control. The XRD analysis showed the significant increase in average crystallite size by 49.20% in the treated sample with respect to the control. The DSC analysis showed the significant increase (67.20%) in latent heat of fusion of treated sample with respect to the control. The TGA analysis showed the onset temperature of thermal degradation at 170°C in the control sample that was slightly decreased to 168.05°C after biofield treatment. Moreover, the Tmax (maximum thermal degradation temperature) was also decreased slightly from 186.66°C (control) to 183.38°C (treated). This indicated the early phase of vaporization in treated sample as compared to the control. The FT-IR spectroscopic study exhibited the alteration in wavenumber of S=O group that suggests the effect of biofield treatment on force constant and bond strength of MSM molecules.

The Potential Impact of Biofield Energy Treatment on the Physical and Thermal Properties of Silver Oxide Powder

Abstract

Silver oxide has gained significant attention due to its antimicrobial activities. The purpose of this study was to evaluate the impact of biofield energy treatment on the physical and thermal properties of silver oxide (Ag2O). The silver oxide powder was divided into two parts, one part was kept as control and another part was received Mr. Trivedi’s biofield energy treatment. The control and treated samples were analyzed using X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and Fourier transform infrared (FT-IR) spectroscopy. The XRD diffractogram showed that the crystallite size of treated sample was significantly altered on the planes (200), (311), and (220) by 100, 150 and -25% respectively, with respect to control. The DSC result exhibited that the thermal energy required to decompose the silver oxide to silver and oxygen was altered from -12.47 to 71.58% in treated samples as compared to the control. TGA showed that the onset temperature of thermal degradation was reduced from 335°C (control) to 322.4°C. In addition, the rate of weight loss in treated sample was increased by 4.14% as compared to the control. Besides, the FT-IR did not show any alteration in absorption wavenumber of treated sample as compared to the control. Hence, the XRD, DSC and TGA data revealed that the biofield energy treatment has a significant impact on the physical and thermal properties of silver oxide powder. Therefore, the biofield energy treatment might improve the dissolution rate in formulation and bioavailability of treated silver oxide as compared to control.

Physical, Thermal and Spectral Properties of Biofield Treated 3-Nitroacetophenone

Abstract

3-Nitroacetophenone (3-NAP) is an organic compound used as an intermediate for the synthesis of pharmaceutical agents. The aim of this study was to evaluate the impact of biofield energy treatment on the physical, thermal and spectral properties of 3-NAP. The study was performed in two groups i.e. control and treated. The control group remained as untreated, and the treated group received Mr. Trivedi’s biofield energy treatment. The control and treated 3-NAP samples were further characterized by X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), laser particle size analyzer, surface area analyzer, Fourier transform infrared (FT-IR) spectroscopy, and ultra violet-visible spectroscopy (UV-vis) analysis. The XRD analysis showed decrease in crystallite size of treated 3-NAP by 20.27% as compared to the control sample. However, the XRD peaks of treated sample showed an increase in intensity as compared to the control. The DSC result showed a slight increase in melting temperature of treated 3-NAP (80.75ºC) with respect to the control (79.39ºC). The latent heat of fusion of treated 3-NAP was changed by 16.28% as compared to the control sample. The TGA analysis showed an increase in onset temperature of treated sample (192ºC) as compared to the control sample (182ºC). Further, the maximum thermal decomposition temperature (Tmax) of treated 3-NAP was increased as compared to the control. This showed the increase in thermal stability of treated 3-NAP with respect to control. The treated 3-NAP showed an increase in average particle size (d50) by 27.6% along with an increase in size exhibited by 99% of particles (d99) by 4.9% as compared to the control. Brunauer-Emmett-Teller (BET) analysis showed a substantial decrease in surface area by 24.6% with respect to the control. The FT-IR analysis showed an emergence of peak at 1558 cm-1 in treated 3-NAP sample as compared to the control. Nevertheless, the UV spectral analysis of treated 3-NAP showed no alterations in absorption peaks as compared to the control. Altogether, the result showed that biofield energy treatment has altered the physical, thermal and spectral properties of treated 3-NAP as compared to the control.

Characterization of Physico-Chemical and Spectroscopic Properties of Biofield Energy Treated 4-Bromoacetophenone

Abstract

4-Bromoacetophenone is an acetophenone derivative known for its usefulness in organic coupling reactions and various biological applications. The aim of the study was to evaluate the impact of biofield energy treatment on 4- bromoacetophenone using various analytical methods. The material is divided into two groups for this study i.e. control and treated. The control group remained as untreated and the treated group was subjected to Mr. Trivedi’s biofield energy treatment. Then, both the samples were characterized using X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR), gas chromatography-mass spectrometry (GC-MS), and UV-visible spectrometry (UV-vis). The XRD study revealed that the crystallite size of treated 4-bromoacetophenone was decreased significantly to 16.69% with decreased intensity as compared to the control. The thermal studies revealed that the slight change was observed in the melting point and latent heat of fusion (ΔH) of biofield energy treated sample as compared to the control. Maximum degradation temperature (Tmax) of treated 4-bromoacetophenone was decreased by 7.26% as compared to the control (169.89°C→157.54°C). The FT-IR spectra showed that the C=O stretching frequency at 1670 cm-1 was shifted to higher frequency region (1672 in T1 and 1685 cm-1 in T2, in two treated samples for FT-IR) after biofield energy treatment. Moreover, the GC-MS data revealed that the isotopic abundance ratio of either 13C/12C or 2H/1H (PM+1)/PM was decreased up to 9.12% in T2 sample whereas increased slightly up to 3.83% in T3 sample. However, the isotopic abundance ratio of either 81Br/79Br or 18O/16O (PM+2)/PM of treated 4-bromoacetophenone was decreased from 0.10% to 1.62% (where PM-primary mass of the molecule, (PM+1) and (PM+2) are isotopic mass of the molecule). The UV spectra showed the similar electronic behavior like absorption maximum in control and treated samples. Overall, the experimental results suggest that Mr. Trivedi’s biofield energy treatment has significant effect on the physical, thermal, and spectral properties of 4-bromoacetophenone.

Biofield Energy Treatment: A Potential Strategy for Modulating Physical, Thermal and Spectral Properties of 3-Chloro-4-fluoroaniline

Abstract

3-Chloro-4-fluoroaniline (CFA) is used as an intermediate for the synthesis of pharmaceutical compounds. The objective of this study was to investigate the influence of biofield energy treatment on the physical, thermal and spectral properties of CFA. The study was performed in two groups (control and treated). The control group remained as untreated, and the treated group received Mr. Trivedi’s biofield energy treatment. The control and treated CFA samples were further characterized by x-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), fourier transform infrared (FT-IR) spectroscopy, and ultra violet-visible spectroscopy (UV-vis) analysis. The XRD analysis of treated CFA showed significant changes in the intensity of peaks as compared to the control. However, the average crystallite size (G) was significantly decreased by 22.08% in the treated CFA with respect to the control. The DSC analysis showed slight decrease in the melting temperature of treated CFA (47.56°C) as compared to the control (48.05°C). However, the latent heat of fusion in the treated sample was considerably changed by 4.28% with respect to the control. TGA analysis showed increase in maximum thermal decomposition temperature (Tmax) of the treated sample (163.34°C) as compared to the control sample (159.97°C). Moreover the onset temperature of treated CFA (148 °C) was also increased as compared to the control sample (140°C). Additionally, the weight loss of the treated sample was reduced (42.22%) with respect to the control (56.04%) that may be associated with increase in thermal stability. The FT-IR spectroscopic evaluation showed emergence of one new peak at 3639 cm-1 and alteration of the N-H (stretching and bending) peak in the treated sample as compared to the control. Overall, the result demonstrated that Mr. Trivedi’s biofield energy treatment has paramount influence on the physical, thermal and spectral properties of CFA.

Physicochemical and Spectroscopic Characterization of Biofield Treated Triphenyl Phosphate

Abstract

Triphenyl phosphate (TPP) is a triester of phosphoric acid and phenol. It is commonly used as a fire-retarding agent and plasticizer for nitrocellulose and cellulose acetate. The present study was an attempt to evaluate the impact of biofield treatment on physicochemical and spectroscopic properties of TPP. The study was carried out in two groups i.e. control and treatment. The treatment group was subjected to Mr. Trivedi’s biofield treatment. The control and treated samples of TPP were characterized using X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR), and ultraviolet-visible (UV-Vis) spectroscopy. XRD study revealed the decrease in crystallite size (6.13%) of treated TPP that might be due to presence of strains and increase in atomic displacement from their ideal lattice positions as compared to control sample. DSC thermogram of treated TPP showed the increase in melting temperature (1.5%) and latent heat of fusion (66.34%) with respect to control. TGA analysis showed the loss in weight by 66.79% in control and 47.96% in treated sample. This reduction in percent weight loss suggests the increase of thermal stability in treated sample as compared to control. FT-IR and UV spectroscopic results did not show the alteration in the wavenumber and wavelength of FT-IR and UV spectra, respectively in treated TPP with respect to control. Altogether, the XRD and DSC/TGA results suggest that biofield treatment has the impact on physical and thermal properties of treated TPP.

Physical, Thermal and Spectral Properties of Biofield Treated 1,2,3-Trimethoxybenzene

Abstract

Study background: 1,2,3-Trimethoxybenzene is an important compound used for the synthesis of chemicals and pharmaceutical agents. The objective of this study was to investigate the influence of biofield energy treatment on the physical, thermal and spectral properties of 1,2,3-trimethoxybenzene.

Methods: The study was performed by dividing the sample into two groups (control and treated). The control group remained as untreated, while the treated group received Mr Trivedi’s biofield energy treatment. The control and treated 1,2,3-trimethoxybenzene samples were then characterized by X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, and ultra violetvisible spectroscopy (UV-Vis) analysis.

Results: XRD studies revealed the significant increase in crystallite size of treated sample by 45.96% as compared to the control sample. DSC analysis showed a decrease in melting temperature of the treated sample (45.93ºC) with respect to control (46.58ºC). Additionally, the substantial change was evidenced in latent heat of fusion of treated sample by 64.18% as compared to the control. TGA analysis indicated a decrease in maximum thermal decomposition temperature (Tmax) of treated sample (151.92ºC) as compared to the control sample (154.43ºC). This indicated the decrease in thermal stability of the treated sample as compared to the control. FT-IR spectroscopic analysis showed an increase in the frequency of C-O bond in treated sample (1105→1174 cm-1) as compared to the control sample. However, UV analysis showed no changes in absorption peaks in treated sample as compared to the untreated sample.

Conclusion: Overall, the result indicated that biofield energy treatment has altered the physical, thermal and spectral properties of the treated sample as compared to control. Hence, the treated sample could be used as an intermediate in the synthesis of organic compounds.

Characterization of Physicochemical and Thermal Properties of Chitosan And Sodium Alginate after Biofield Treatment

Abstract

Chitosan (CS) and sodium alginate (SA) are two widely popular biopolymers which are used for biomedical and pharmaceutical applications from many years. The objective of present study was to study the effect of biofield treatment on physical, chemical and thermal properties of CS and SA. The study was performed in two groups (control and treated). The control group remained as untreated, and biofield treatment was given to treated group. The control and treated polymers were characterized by Fourier transform infrared (FT-IR) spectroscopy, CHNSO analysis, X-ray diffraction (XRD), particle size analysis, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). FT-IR of treated chitosan showed increase in frequency of –CH stretching (2925→2979 cm-1) vibrations with respect to control. However, the treated SA showed increase in frequency of –OH stretching (3182→3284 cm-1) which may be correlated to increase in force constant or bond strength with respect to control. CHNSO results showed significant increase in percentage of oxygen and hydrogen of treated polymers (CS and SA) with respect to control. XRD studies revealed that crystallinity was improved in treated CS as compared to control. The percentage crystallite size was increased significantly by 69.59% in treated CS with respect to control. However, treated SA showed decrease in crystallite size by 41.04% as compared to control sample. The treated SA showed significant reduction in particle size (d50 and d99) with respect to control SA. DSC study showed changes in decomposition temperature in treated CS with respect to control. A significant change in enthalpy was observed in treated polymers (CS and CA) with respect to control. TGA results of treated CS showed decrease in Tmax with respect to control. Likewise, the treated SA also showed decrease in Tmax which could be correlated to reduction in thermal stability after biofield treatment. Overall, the results showed that biofield treatment has significantly changed the physical, chemical and thermal properties of CS and SA.

Characterization of Biofield Energy Treated 3-Chloronitrobenzene: Physical, Thermal, and Spectroscopic Studies

Abstract

The chloronitrobenzenes are widely used as the intermediates in the production of pharmaceuticals, pesticides and rubber processing chemicals. However, due to their wide applications, they are frequently released into the environment thereby creating hazards. The objective of the study was to use an alternative strategy i.e. biofield energy treatment and analysed its impact on the physical, thermal and spectral properties of 3-chloronitrobenzene (3-CNB). For the study, the 3-CNB sample was taken and divided into two groups, named as control and treated. The analytical techniques used were X-ray diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), UV-Visible (UV-Vis), and Fourier transform infrared (FT-IR) spectroscopy. The treated group was subjected to the biofield energy treatment and analysed using these techniques against the control sample. The XRD data showed an alteration in relative intensity of the peak along with 30% decrease in the crystallite size of the treated sample as compared to the control. The TGA studies revealed the decrease in onset temperature of degradation from 140ºC (control) to 120°C, while maximum thermal degradation temperature was changed from 157.61ºC (control) to 150.37ºC in the treated sample as compared to the control. Moreover, the DSC studies revealed the decrease in the melting temperature from 51°C (control) →47°C in the treated sample. Besides, the UV-Vis and FT-IR spectra of the treated sample did not show any significant alteration in terms of wavelength and frequencies of the peaks, respectively from the control sample. The overall study results showed the impact of biofield energy treatment on the physical and thermal properties of 3-CNB that can further affect its use as a chemical intermediate and its fate in the environment.

Isotopic Abundance Analysis of Biofield Treated Benzene, Toluene and p-Xylene Using Gas Chromatography-Mass Spectrometry (GC-MS)

Abstract

Benzene, toluene and p-xylene are derivatives of benzene, generally produced from crude petroleum and have numerous applications in industry. The aim of the present study was to evaluate the impact of biofield treatment on isotopic abundance of these benzene derivatives by gas chromatography-mass spectrometry (GC-MS). Benzene, toluene and p-xylene samples were divided into two parts: control and treatment. Control part was remained as untreated and treatment part was subjected to Mr. Trivedi’s biofield treatment. Control and treated samples were characterized using GC-MS. GC-MS data revealed that isotopic abundance ratio of 13C/12C or 2H/1H (PM+1/PM) of treated samples were significantly increased from un-substituted to substituted benzene rings (where, PM- primary molecule, PM+1- isotopic molecule either for 13C/12C and/or 2H/1H). The isotopic abundance ratio of 13C/12C or 2H/1H (PM+1/PM) in benzene was decreased significantly by 42.14% as compared to control. However, the isotopic abundance ratio of (PM+1/PM) in treated toluene and p-xylene was significantly increased up to 531.61% and 134.34% respectively as compared to their respective control. Thus, overall data suggest that biofield treatment has significantly altered the isotopic abundance ratio of (PM+1/PM) in a different way for un-substituted and substituted benzenes.

Influence of Biofield Energy Treatment on Isotopic Abundance Ratio in Aniline Derivatives

Abstract

The aim of this study was to evaluate the impact of biofield energy treatment on the isotopic abundance of 13C/12C or 2H/1H or 15N/14N ≡ (PM+1)/PM in aniline; and (PM+1)/PM and 81Br/79Br ≡ (PM+2)/PM in 4-bromoaniline using Gas Chromatography-Mass Spectrometry (GC-MS). Aniline and 4-bromoaniline samples were divided into two parts: control and treated. The control part remained as untreated, while the treated part was subjected to Mr. Trivedi’s biofield energy treatment. The treated samples were subdivided in three parts named as T1, T2, and T3 for aniline and four parts named as T1, T2, T3, and T4 for 4-bromoaniline. The GC-MS data revealed that the isotopic abundance ratio of (PM+1)/PM in aniline was increased from -40.82%, 30.17% and 73.12% in T1, T2 and T3 samples respectively. However in treated samples of 4-bromoaniline the isotopic abundance ratio of PM+1/PM was increased exponentially from -4.36 % (T1) to 368.3% (T4) as compared to the control. A slight decreasing trend of the isotopic ratio of (PM+2)/ PM in 4-bromoaniline was observed after biofield energy treatment. The GC-MS data suggests that the biofield energy treatment has significantly increased the isotopic abundance of 2H, 13C and 15N in the treated aniline and 4-bromoaniline, while slight decreased the isotopic abundance of 81Br in treated 4-bromoaniline as compared to their respective control.

Evaluation of Physical, Thermal and Spectroscopic Properties of Biofield Treated p-Hydroxyacetophenone

Abstract

P-Hydroxyacetophenone (PHAP) is an aromatic ketone derivative that is mainly used in the manufacturing of various pharmaceuticals, flavours, fragrances, etc. In the present study, the impact of Mr. Trivedi’s biofield energy treatment was analysed on various properties of PHAP viz. crystallite size, surface area, melting temperature, thermal decomposition, and spectral properties. The PHAP sample was divided into two parts; one was kept as control sample while another part was named as treated sample. The treated sample was given the biofield energy treatment and various parameters were analysed as compared to the control sample by X-ray diffraction (XRD), surface area analyser, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), ultravioletvisible (UV-VIS), and Fourier transform infrared (FT-IR) spectroscopy. The XRD studies showed the decrease in crystallite size of the treated sample (61.25 nm) as compared to the control (84.18 nm); however the intensity of peaks in diffractogram was increased in treated sample. Besides, the surface area of treated sample was decreased by 41.17% as compared to the control. The TGA analysis revealed that onset temperature as well as Tmax (maximum thermal decomposition temperature) was increased in the treated sample. However, the latent heat of fusion (ΔH) was decreased from 124.56 J/g (control) to 103.24 J/g in the treated sample. The treated and control samples were also evaluated by UV-Vis and FT-IR spectroscopy and did not show any significant alteration in spectra of treated sample as compared to the respective control. Hence, the overall results suggest that there was an impact of biofield energy treatment on the physical and thermal properties of PHAP sample.

Physicochemical and Atomic Characterization of Silver Powder after Biofield Treatment

Abstract

Silver is widely utilized as antimicrobial agent and wound dressing, where its shape, size, surface area, and surface charge play an important role. The aim of present study was to evaluate the impact of biofield treatment on physicochemical and atomic properties of silver powder. The silver powder was divided into two groups, coded as control and treatment. The treatment group received Mr. Trivedi’s biofield treatment. Subsequently, control and treated samples were characterized using particle size analyzer, X-ray diffraction (XRD) and surface area analyser. Particle size data exhibited that particle sizes d10, d50, d90, and d99 (Size, below which 10, 50, 90, and 99% particle are present, respectively) of treated silver powder were substantially reduced up to 95.8, 89.9, 83.2, and 79.0% on day 84 as compared to control. XRD results showed that lattice parameter, unit cell volume, and atomic weight were reduced, whereas density and nuclear charge per unit volume were found to be increased as compared to control. In addition, the crystallite size was significantly reduced up to 70% after biofield treatment on day 105 as compared to control. Furthermore, the surface area of treated silver powder was substantially enhanced by 49.41% on day 68 as compared to control. These findings suggest that biofield treatment has significantly altered the atomic and physicochemical properties which could make silver more useful in antimicrobial applications.

Physicochemical and Spectroscopic Characterization of Biofield Energy Treated p-Anisidine

Abstract

The p-anisidine is widely used as chemical intermediate in the production of various dyes, pigments, and pharmaceuticals. This study was aimed to evaluate the effect of biofield energy treatment on the physicochemical and spectroscopic properties of p-anisidine. The study was performed after dividing the sample in two groups; one was remained as untreated and another was subjected to Mr. Trivedi’s biofield energy treatment. Afterward, both the control and treated samples of p-anisidine were evaluated using X-ray diffraction (XRD), surface area analyzer, differential scanning calorimetry (DSC), thermogravimetric analysis-derivative thermogravimetry (TGA-DTG), Fourier transform infrared (FT-IR), and ultraviolet-visible (UV-Vis) spectroscopy. The XRD analysis showed the increase in unit cell volume from 683.81 → 690.18 × 10-24 cm3 and crystallite size from 83.84→84.62 nm in the treated sample with respect to the control. The surface area analysis exhibited the significant increase (25.44%) in the surface area of treated sample as compared to control. The DSC thermogram of control p-anisidine showed the latent heat of fusion and melting temperature and 146.78 J/g and 59.41°C, respectively, which were slightly increased to 148.89 J/g and 59.49°C, respectively after biofield treatment. The TGA analysis showed the onset temperature of thermal degradation at 134.68°C in the control sample that was increased to 150.02°C after biofield treatment. The result showed about 11.39% increase in onset temperature of thermal degradation of treated p-anisidine as compared to the control. Moreover, the Tmax (temperature at which maximum thermal degradation occurs) was also increased slightly from 165.99°C (control) to 168.10°C (treated). This indicated the high thermal stability of treated p-anisidine as compared to the control. However, the FT-IR and UV spectroscopic studies did not show any significant changes in the spectral properties of treated p-anisidine with respect to the control.

All together, the XRD, surface area and thermal analysis suggest that Mr. Trivedi’s biofield energy treatment has the impact on physical and thermal properties of the treated p-anisidine.

Impact of Biofield Treatment on Spectroscopic and Physicochemical Properties of p-Nitroaniline

Abstract

Para nitroaniline (p-Nitroaniline) is an organic compound, used as an intermediate in the synthesis of pharmaceuticals drugs, gasoline and dyes. The present study was attempted to investigate the influence of biofield treatment on p-nitroaniline. The study was performed in two groups i.e., control and treatment. The treatment group was subjected to Mr. Trivedi’s biofield treatment. The control and treated samples of p-nitroaniline were characterized using Fourier transform infrared (FT-IR) spectroscopy, Ultraviolet-visible (UV-Vis) spectroscopy, high performance liquid chromatography (HPLC), gas chromatography-mass spectrometry (GC-MS), and differential scanning calorimetry (DSC). FT-IR spectral analysis result suggested the alteration in wavenumber of some groups with respect to control. For instance, the C=C and C-C stretching were observed at 1570 cm-1 and 1430 cm-1, respectively in control sample that were shifted to 1585 cm-1 and 1445 cm-1, respectively after biofield treatment. UV spectral analysis revealed the similar pattern of absorbance maxima (λmax) in both control and treated samples. HPLC data showed an alteration in the retention time of p-nitroaniline peak in treated sample (3.25 min) with respect to control (2.75 min). GC-MS results showed a significant change in the isotopic abundance (δ) of 13C and 18O in treated sample as compared to control. DSC data showed that latent heat of fusion (ΔH) of treated p-nitroaniline was substantially decreased by 10.66% as compared to control. However, the melting point remained same in both control and treated sample of p-nitroaniline. Overall, results obtained from different analytical techniques such as FT-IR, HPLC, GC-MS, and DSC suggested that biofield treatment has significant impact on spectral, physical and thermal properties of p-nitroaniline with respect to control sample.

Characterization of Physical and Thermal Properties of Biofield Treated Neopentyl Glycol

Abstract

Neopentyl glycol (NPG) has been extensively used as solid-solid phase change materials (PCMs) for thermal energy storage applications. The objective of the present study was to evaluate the impact of biofield treatment on physical, spectral and thermal properties of NPG. The study was performed in two groups (control and treated). The control group remained as untreated, and treatment group was subjected to Mr. Trivedi’s biofield treatment. The control and treated NPG were characterized by X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and Fourier transform infrared (FT-IR) spectroscopy. XRD study revealed the decrease in crystallite size of treated NPG by 21.97% as compared to control sample. DSC studies showed slight change in melting temperature of treated NPG as compared to control sample. TGA analysis showed 55.66% weight loss in control NPG however, the treated sample showed reduction in weight loss (44.81%). Additionally, the maximum thermal decomposition temperature (Tmax) of treated NPG (160.40°C) was minimally increased with respect to control sample (159.72°C). This can be inferred as good thermal stability of biofield treated NPG with respect to control. FT-IR spectroscopy showed no structural changes in treated NPG with respect to control sample. The overall results showed that biofield treatment has affected the physical and thermal properties of treated NPG. Moreover, good thermal stability of treated NPG showed that it could be used as phase change materials for thermal energy storage applications.

Physical, Thermal, and Spectroscopic Characterization of Biofield Energy Treated Methyl-2-Naphthyl Ether

Abstract

Methyl-2-naphthyl ether (MNE) is an organic compound and used as the primary moiety for the synthesis of several antimicrobial and anti-inflammatory agents. This study was attempted to evaluate the impact of biofield energy treatment on the physical, thermal, and spectroscopic properties of MNE. The study was carried out in two groups i.e., control and treated. The treated group was subjected to Mr. Trivedi’s biofield treatment. Afterward, the control and treated samples of MNE were evaluated using X-ray diffraction (XRD), surface area analyzer, differential scanning calorimetry (DSC), thermogravimetric analysis-derivative thermogravimetric analysis (TGA-DTG), Fourier transform infrared (FTIR), and ultraviolet-visible (UV-Vis) spectroscopy. The XRD study exhibited the decrease in average crystallite size by 30.70%. The surface area analysis showed 5.32% decrease in surface area of the treated sample with respect to the control. The DSC thermogram of treated MNE exhibited no significant change in the melting temperature; however, the latent heat of fusion was slightly increased (0.83%) after biofield treatment as compared to the control sample. The TGA analysis showed the onset temperature of thermal degradation at 158oC in the control sample that was reduced to 124oC after biofield treatment. The result showed about 21.52% decrease in onset temperature of thermal degradation of treated MNE as compared to the control. Similarly, the end-set temperature of thermal degradation was also reduced by 13.51% after biofield treatment with respect to the control. The FT-IR and UV spectroscopic studies did not show any changes in the wavenumber and wavelength, respectively in treated MNE with respect to the control. Overall, the XRD, surface area and thermal analysis suggest that biofield treatment has the impact on physical and thermal properties of the treated MNE as compared to the control.

Characterization of Physical, Thermal and Spectral Properties of Biofield Treated o-Aminophenol

Abstract

O-aminophenol has extensive uses as a conducting material and in electrochemical devices. The objective of this research was to investigate the influence of biofield energy treatment on the physical thermal and spectral properties of o-aminophenol. The study was performed in two groups; the control group was remained as untreated, while the treated group was subjected to Mr. Trivedi’s biofield energy treatment. Subsequently, the control and treated o-aminophenol samples were characterized by X-ray diffraction (XRD), Differential scanning calorimetry (DSC), Thermogravimetric analysis (TGA), surface area analysis, Fourier transform infrared (FT-IR) spectroscopy, and Ultra violet-visible spectroscopy analysis (UV-vis). The XRD analysis showed an increase in peak intensity of the treated o-aminophenol with respect to the control. Additionally, the crystallite size of the treated o-aminophenol was increased by 34.51% with respect to the control sample. DSC analysis showed a slight increase in the melting temperature of the treated sample as compared to the control. However, a significant increase in the latent heat of fusion was observed in the treated o-aminophenol by 162.24% with respect to the control. TGA analysis showed an increase in the maximum thermal decomposition temperature (Tmax) in treated o-aminophenol (178.17ºC) with respect to the control (175ºC). It may be inferred that the thermal stability of o-aminophenol increased after the biofield treatment. The surface area analysis using BET showed a substantial decrease in the surface area of the treated sample by 47.1% as compared to the control. The FT-IR analysis showed no changes in the absorption peaks of the treated sample with respect to the control. UV-visible analysis showed alteration in the absorption peaks i.e. 211→203 nm and 271→244 nm of the treated o-aminophenol as compared to the control. Overall, the results showed that the biofield treatment caused an alteration in the physical, thermal and spectral properties of the treated o-aminophenol.

Biofield Treatment: An Effective Strategy for Modulating the Physical and Thermal Properties of O-Nitrophenol, M-Nitrophenol and P-Tertiary Butyl Phenol

Abstract

Phenolic compounds are commonly used for diverse applications such as in pharmaceuticals, chemicals, rubber, dyes and pigments. The objective of present research was to study the impact of Mr. Trivedi’s biofield treatment on physical and thermal properties of phenol derivatives such as o-nitrophenol (ONP), m-nitrophenol (MNP) and p-tertiary butyl phenol (TBP). The study was performed in two groups (control and treated). The control and treated compounds were characterized using X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and surface area analysis. XRD analysis showed increase in crystallite size by 16.05% in treated ONP as compared to control. However, the treated MNP showed decrease in crystallite size by 16.17% as compared to control. The treated TBP showed increase in crystallite size by 5.20% as compared to control. DSC of treated MNP exhibited increase in melting temperature with respect to control, which may be correlated to higher thermal stability of treated sample. However, the treated TBP exhibited no significant change in melting temperature with respect to control. TGA analysis of treated ONP and TBP showed an increase in maximum thermal decomposition temperature (Tmax) as compared to control. However, the treated MNP showed slight decrease in Tmax in comparison with control sample. Surface area analysis of treated ONP showed decrease in surface area by 65.5%. However, surface area was increased by 40.7% in treated MNP as compared to control. These results suggest that biofield treatment has significant effect on physical and thermal properties of ONP, MNP and TBP.

Characterization of Physical, Spectral and Thermal Properties of Biofield Treated 1,2,4-Triazole

Abstract

Triazoles are an important class of compounds used as core molecule for the synthesis of many pharmaceutical drugs. The objective of the present research was to investigate the influence of biofield treatment on physical, spectral and thermal properties of 1,2,4-triazole. The study was performed in two groups, control and treatment. The control group remained as untreated, and biofield treatment was given to treatment group. The control and treated 1,2,4-triazole were characterized by X-ray diffraction (XRD), Differential Scanning Calorimetry (DSC), Thermo Gravimetric analysis (TGA), Surface area analyzer, and Fourier transform infrared (FT-IR) spectroscopy. XRD analysis revealed a decrease in unit cell volume of treated 1,2,4-triazole (662.08 10-24 cm3) as compared to control sample (666.34 10-24 cm3). Similarly, a decrease in molecular weight of treated 1,2,4-triazole (69.78 g/mol) with respect to control (70.23 g/mol) was observed. Additionally, a substantial decrease in crystallite size (G) was observed in treated 1,2,4-triazole by 16.34% with respect to control. DSC analysis showed a slight increase in melting temperature of treated 1,2,4-triazole (124.22°C) as compared to control (123.76°C). Moreover, a significant increase in latent heat of fusion was noticed in treated 1,2,4-triazole by 21.16% as compared to control sample. TGA analysis showed a significant increase in maximum thermal decomposition temperature (Tmax) of treated 1,2,4-triazole (213.40°C) as compared to control (199.68°C). Surface area analysis using BET showed a substantial increase in surface area of the treated compound by 13.52% with respect to control. However, FT-IR analysis showed no structural changes in treated 1,2,4-triazole with respect to control. Overall, the result showed significant alteration of physical and thermal properties of the treated 1,2,4-triazole with respect to control.

Characterization of Physical and Structural Properties of Aluminium Carbide Powder: Impact of Biofield Treatment

Abstract

Aluminium carbide (Al4C3) has gained extensive attention due to its abrasive and creep resistance properties. Aim of the present study was to evaluate the impact of biofield treatment on physical and structural properties of Al4C3 powder. The Al4C3 powder was divided into two parts i.e. control and treated. Control part was remained as untreated and treated part received biofield treatment. Subsequently, control and treated Al4C3 samples were characterized using X-ray diffraction (XRD), surface area analyser and Fourier transform infrared spectroscopy (FTIR). XRD data revealed that lattice parameter and unit cell volume of treated Al4C3 samples were increased by 0.33 and 0.66% respectively, as compared to control. The density of treated Al4C3 samples was reduced upto 0.65% as compared to control. In addition, the molecular weight and crystallite size of treated Al4C3 samples were increased upto 0.66 and 249.53% respectively as compared to control. Furthermore, surface area of treated Al4C3 sample was increased by 5% as compared to control. The FT-IR spectra revealed no significant change in absorption peaks of treated Al4C3 samples as compared to control. Thus, XRD and surface area results suggest that biofield treatment has substantially altered the physical and structural properties of treated Al4C3 powder.

Characterization of Physical, Thermal and Spectral Properties of Biofield Treated 2, 6-Diaminopyridine

Abstract

2, 6-Diaminopyridine (2, 6-DAP) has extensive use in synthesis of pharmaceutical compounds. The objective of present research was to investigate the influence of biofield treatment on physical, thermal and spectral properties of 2, 6-DAP. The study was performed in two groups, control and treated. The control group remained as untreated, and biofield treatment was given to treatment group. The control and treated 2, 6-DAP samples were characterized by X-ray diffraction (XRD), Differential scanning calorimetry (DSC), Thermo gravimetric analysis (TGA), Laser particle size analyzer, surface area analyzer, Fourier transform infrared (FT-IR) spectroscopy, and UV-visible spectroscopy. XRD analysis revealed decrease in intensity of the peaks of treated 2, 6-DAP with respect to control. Unit cell volume and molecular weight were decreased by 2.97% and 2.98% respectively in treated 2, 6-DAP as compared to control. Crystallite size was decreased by 24.70% in treated 2, 6-DAP with respect to control. DSC analysis showed no significant change in melting temperature of treated 2, 6-DAP with respect to control. Nevertheless, the treated 2, 6-DAP showed significant increase in latent heat of fusion by 35.52% as compared to control 2, 6-DAP. TGA analysis showed decrease in percent weight loss of the treated 2, 6-DAP in comparison with control. Additionally, substantial increase in maximum thermal decomposition temperature (Tmax) was observed in treated 2, 6-DAP (203.52°C) as compared with control 2, 6-DAP (186.84°C). Particle size analysis results showed a substantial decrease in d50 (average particle size) and d99 (size exhibited by 99% of the particles) of the treated 2, 6-DAP by 20.5 and 57.4%, respectively as compared to control. Additionally, the BET analysis showed substantial increase in surface area of treated 2, 6-DAP by 75.58% as compared to control. FT-IR spectrum of treated 2, 6-DAP showed alteration in O-H stretching (3390→3370 cm-1), C-H stretching (3132→3138 cm-1) and N-H bending (1637→1604 cm-1) vibration peaks with respect to control. However, UV-visible analysis of treated 2, 6-DAP showed no significant changes in absorption peaks (λmax) with respect to control. Overall, the results demonstrated that biofield has significant impact on the physical, thermal and spectral properties of the treated 2, 6-DAP.

Physical, Thermal and Spectroscopic Studies on Biofield Treated p-Dichlorobenzene

Abstract

Para-dichlorobenzene (p-DCB) is widely used as a chemical intermediate in manufacturing of dyes, pharmaceuticals, polymers and other organic synthesis. The aim of present study was to evaluate the impact of biofield treatment on physical, thermal, and spectroscopic properties of p-dichlorobenzene. The p-dichlorobenzene sample was divided into two groups that served as treated and control. The treated group received Mr. Trivedi’s biofield treatment. Subsequently the control and treated samples were evaluated using X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and UV-Vis spectroscopy. XRD result showed an increase in crystallite size (4.93%) along with alteration in peak intensity of treated sample as compared to control. Furthermore, DSC analysis results showed that the latent heat of fusion of treated p-dichlorobenzene was considerably reduced by 8.66% as compared to control. The reduction in melting point of treated sample (54.99°C) was also observed as compared to control (57.01°C) p-dichlorobenzene. Moreover, TGA/DTG studies showed that Tmax (temperature, at which sample lost maximum of its weight) was increased by 6.26% and weight loss per degree celsius (°C) was decreased by 12.77% in biofield treated p-dichlorobenzene as compared to control sample. It indicates that thermal stability of treated p-dichlorobenzene sample might increase as compared to control sample. However, no change was found in UV-Vis spectroscopic character of treated p-dichlorobenzene as compared to control. These findings suggest that biofield treatment has significantly altered the physical and thermal properties of p-dichlorobenzene, which could make it more useful as a chemical intermediate.

Spectroscopic Characterization of Disodium Hydrogen Orthophosphate and Sodium Nitrate after Biofield Treatment

Abstract

Disodium hydrogen orthophosphate is a water soluble white powder widely used as pH regulator and saline laxative. The sodium nitrate is a highly water soluble white solid, used in high blood pressure, dentinal hypersensitivity, and production of fertilizers. The present study was aimed to investigate the impact of biofield treatment on spectral properties of disodium hydrogen orthophosphate and sodium nitrate. The study was performed in two groups i.e., control and treatment of each compound. The treatment groups were subjected to Mr. Trivedi’s biofield treatment. The spectral properties of control and treated groups of both compounds were studied using Fourier transform infrared (FT-IR) and Ultraviolet-Visible (UV-Vis) spectroscopic techniques. FT-IR spectrum of biofield treated disodium hydrogen orthophosphate showed the shifting in wavenumber of vibrational peaks (with respect to control) corresponding to O-H stretching from 2975 to 3357 cm-1, PO-H symmetrical stretching from 2359 to 2350 cm-1, O=P-OH deformation from 1717-1796 cm-1 to 1701-1735 cm-1, P=O asymmetric stretching from 1356 to 1260 cm-1 and P=O symmetric stretching from 1159 to 1132 cm-1, etc. Likewise, the FT-IR spectrum of sodium nitrate exhibited the shifting of vibrational frequency of N=O stretching from 1788 to 1648 cm-1 and NO3 asymmetric and symmetric stretchings from 1369 to 1381 cm-1 and 1340 to 1267 cm-1.

UV spectrum of treated disodium hydrogen orthophosphate revealed a negative absorbance; it may be due to decrease in UV absorbance as compared to control. UV spectrum of control sodium nitrate exhibited two absorbance maxima (λmax) at 239.4 nm and 341.4 nm, which were altered to one absorbance maxima (λmax) at 209.2 nm after biofield treatment.

Overall, the FT-IR and UV spectroscopic data of both compounds suggest an impact of biofield treatment on spectral properties with respect to force constant, bond strength, dipole moments and transition energy between two orbitals (ground state and excited state) as compared to respective control.

Evaluation of Biofield Treatment on Atomic and Thermal Properties of Ethanol

Abstract

Ethanol is a polar organic solvent, and frequently used as a fuel in automobile industries, principally as an additive with gasoline due to its higher octane rating. It is generally produced from biomass such as corn, sugar and some other agriculture products. In the present study, impact of biofield treatment on ethanol was evaluated with respect to its atomic and thermal properties. The ethanol sample was divided into two parts i.e., control and treatment. Control part was remained untreated. Treatment part was subjected to Mr. Trivedi’s biofield treatment. Control and treated samples were characterized using Gas chromatography-mass Spectrometry (GC-MS), Differential scanning calorimetry (DSC), and High performance liquid chromatography (HPLC). GC-MS data revealed that isotopic abundance of 13C i.e., δ13C of treated ethanol was significantly changed from -199% upto 155% as compared to control. The DSC data exhibited that the latent heat of vaporization of treated ethanol was increased by 94.24% as compared to control, while no significant change was found in boiling point. Besides, HPLC data showed that retention time was 2.65 minutes in control, was increased to 2.76 minutes in treated ethanol sample. Thus, overall data suggest that biofield treatment has altered the atomic and thermal properties of ethanol.

Characterization of Physical, Thermal and Structural Properties of Chromium (VI) Oxide Powder: Impact of Biofield Treatment

Abstract

Chromium (VI) oxide (CrO3) has gained extensive attention due to its versatile physical and chemical properties. The objective of the present study was to evaluate the impact of biofield treatment on physical, thermal and structural properties of CrO3 powder. In this study, CrO3 powder was divided into two parts i.e. control and treatment. Control part was remained as untreated and treated part received Mr. Trivedi’s biofield treatment. Subsequently, control and treated CrO3 samples were characterized using Thermo gravimetric analysis-differential thermal analysis (TGA-DTA), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). DTA showed that the melting point of treated CrO3 was increased upto 212.65°C (T3) as compared to 201.43°C in control. In addition, the latent heat of fusion was reduced upto 51.70% in treated CrO3 as compared to control. TGA showed the maximum thermal decomposition temperature (Tmax) around 330°C, was increased upto 340.12°C in treated CrO3 sample. XRD data revealed that lattice parameter and unit cell volume of treated CrO3 samples were reduced by 0.25 and 0.92% respectively, whereas density was increased by 0.93% in treated CrO3 sample as compared to control. The crystallite size of treated CrO3 was increased from 46.77 nm (control) to 60.13 nm after biofield treatment. FT-IR spectra showed the absorption peaks corresponding to Cr=O at 906 and 944 cm-1 in control, which were increased to 919 and 949 cm¬1 in treated CrO3 after biofield treatment. Overall, these results suggest that biofield treatment has substantially altered the physical, thermal and structural properties of CrO3 powder.

Fourier Transform Infrared and Ultraviolet-Visible Spectroscopic Characterization of Ammonium Acetate and Ammonium Chloride: An Impact of Biofield Treatment

Abstract

Ammonium acetate and ammonium chloride are the white crystalline solid inorganic compounds having wide application in synthesis and analytical chemistry. The aim of present study was to evaluate the impact of biofield treatment on spectral properties of inorganic salt like ammonium acetate and ammonium chloride. The study was performed in two groups of each compound i.e., control and treatment. Treatment groups were received Mr. Trivedi’s biofield treatment. Subsequently, control and treated groups were evaluated using Fourier Transform Infrared (FT-IR) and Ultraviolet-Visible (UV-Vis) spectroscopy. FT-IR spectrum of treated ammonium acetate showed the shifting in wavenumber of vibrational peaks with respect to control. Like, the N-H stretching was shifted from 3024-3586 cm-1 to 3033-3606 cm-1, C-H stretching from 2826-2893 cm-1 to 2817-2881 cm-1, C=O asymmetrical stretching from 1660-1702 cm-1 to 1680-1714 cm-1, N-H bending from 1533-1563 cm-1 to 1506-1556 cm-1 etc. Treated ammonium chloride showed the shifting in IR frequency of three distinct oscillation modes in NH4 ion i.e., at ν1, 3010 cm-1 to 3029 cm-1; ν2, 1724 cm-1 to 1741 cm-1; and ν3, 3156 cm-1 to 3124 cm-1. The N-Cl stretching was also shifted to downstream region i.e., from 710 cm-1 to 665 cm-1 in treated ammonium chloride. UV spectrum of treated ammonium acetate showed the absorbance maxima (λmax) at 258.0 nm that was shifted to 221.4 nm in treated sample. UV spectrum of control ammonium chloride exhibited two absorbance maxima (λmax) i.e., at 234.6 and 292.6 nm, which were shifted to 224.1 and 302.8 nm, respectively in treated sample.

Overall, FT-IR and UV data of both compounds suggest an impact of biofield treatment on atomic level i.e., at force constant, bond strength, dipole moments and electron transition energy between two orbitals of treated compounds as compared to respective control.

Influence of Biofield Treatment on Physical and Structural Characteristics of Barium Oxide and Zinc Sulfide

Abstract

Barium oxide (BaO) and zinc sulfide (ZnS) are well known for their applications in electrical, optical and chemical industries. The present study was aimed to evaluate the impact of biofield treatment on the structural and physical properties of BaO and ZnS powder. The study was carried out in two groups, one was set to control, and another group was subjected to Mr. Trivedi’s biofield treatment. Control and treated samples of BaO and ZnS were analyzed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and surface area analyzer. XRD data showed that lattice parameter and unit cell volume of BaO powder were reduced upto 0.42% and 1.26%, respectively as compared to control. Whereas, density of treated BaO was increased upto 1.27% as compared to control. Besides, the unit cell volume was changed in treated ZnS from -0.55 to 0.24% as compared to control that led to change in density from -0.24 to 0.55% after biofield treatment. However, the crystallite size was substantially increased upto 40.5% and 71.4% in treated BaO and ZnS, respectively as compared to control. FT-IR data exhibited that absorption peaks at wavenumber 862/cm (control) was shifted to 858/cm in treated BaO. Upward shifting of absorption peaks corresponding to Zn-S stretching bond was observed in treated (617/cm) as compared to control (592/cm). Furthermore, surface area result showed that it was reduced by 4.32% and 2.1% in treated BaO and ZnS powder, respectively as compared to control. Hence, these, findings suggest that biofield treatment has altered the structural and physical properties of BaO and ZnS powders.

Biofield Treatment: A Potential Strategy for Modification of Physical and Thermal Properties of Indole

Abstract

Indole compounds are important class of therapeutic molecules, which have excellent pharmaceutical applications. The objective of present research was to investigate the influence of biofield treatment on physical and thermal properties of indole. The study was performed in two groups (control and treated). The control group remained as untreated, and biofield treatment was given to treated group. The control and treated samples were characterized by X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy and ultraviolet-visible (UV-Vis) spectroscopy. XRD study demonstrated the increase in crystalline nature of treated indole as compared to control. Additionally, the treated indole showed increase in crystallite size by 2.53% as compared to control. DSC analysis of treated indole (54.45ºC) showed no significant change in melting temperature (Tm) in comparison with control sample (54.76ºC). A significant increase in latent heat of fusion (ΔH) by 30.86% was observed in treated indole with respect to control. Derivative thermogravimetry (DTG) of treated indole showed elevation in maximum thermal decomposition temperature (Tmax) 166.49ºC as compared to control (163.37ºC). This was due to increase in thermal stability of indole after biofield treatment. FT-IR analysis of treated indole showed increase in frequency of N-H stretching vibrational peak by 6 cm-1 as compared to control sample. UV spectroscopy analysis showed no alteration in absorption wavelength (λmax) of treated indole with respect to control. The present study showed that biofield has substantially affected the physical and thermal nature of indole.

Physical, Thermal and Spectroscopic Characterization of m-Toluic Acid: an Impact of Biofield Treatment

Abstract

m-toluic acid (MTA) is widely used in manufacturing of dyes, pharmaceuticals, polymer stabilizers, and insect repellents. The aim of present study was to evaluate the impact of biofield treatment on physical, thermal and spectroscopic properties of MTA. MTA sample was divided into two groups that served as treated and control. The treated group received Mr. Trivedi’s biofield treatment. Subsequently, the control and treated samples were evaluated using X-ray diffraction (XRD), surface area analyser, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) and ultraviolet-visible (UV-Vis) spectroscopy. XRD result showed a decrease in crystallite size in treated samples i.e. 42.86% in MTA along with the increase in peak intensity as compared to control. However, surface area analysis showed an increase in surface area of 107.14% in treated MTA sample as compared to control. Furthermore, DSC analysis results showed that the latent heat of fusion was considerably reduced by 40.32%, whereas, the melting temperature was increased (2.23%) in treated MTA sample as compared to control. The melting point of treated MTA was found to be 116.04°C as compared to control (113.51°C) sample. Moreover, TGA/DTG studies showed that the control sample lost 56.25% of its weight, whereas, in treated MTA, it was found 58.60%. Also, Tmax (temperature, at which sample lost maximum of its weight) was decreased by 1.97% in treated MTA sample as compared to control. It indicates that the vaporisation temperature of treated MTA sample might decrease as compared to control. The FT-IR and UV-Vis spectra did not show any significant change in spectral properties of treated MTA sample as compared to control. These findings suggest that biofield treatment has significantly altered the physical and thermal properties of m-toluic acid, which could make them more useful as a chemical intermediate.